Been doing small bed gardening for over 10 yrs. Mostly in ground and then had a raised bed last 3yrs that did well. Had to switch because we moved and dogs now have access to the area. Expanding this year and am so excited. Finally making it happen! Looking for advice on bolts vs screws. I am using plastic wood (recycled) and corrugated sheet metal. Was thinking bolts but now questioning my approach. Any thoughts?? Here is my project I stoked about!!
Hello! bolts vs screws question š
- Thread starter gardenvet
- Start date
Alasgun
Deeply Rooted
Welcome @gardenvet; from Alaska.
Im fine with either for something like this, i do kinda prefer screws as bolting can be problematic if itās not stainless and you need to change something. Another reason i prefer screws is not having a nut on the inside that may get in the way when iāve got the hoops in the beds.
most box stores carry a version of the timber loc style big headed screws. Or a similar style.
Im fine with either for something like this, i do kinda prefer screws as bolting can be problematic if itās not stainless and you need to change something. Another reason i prefer screws is not having a nut on the inside that may get in the way when iāve got the hoops in the beds.
most box stores carry a version of the timber loc style big headed screws. Or a similar style.
Dirtmechanic
Garden Addicted
Agree with @Alasgun ! The large flange screws are fine. There are screws in the aisle that are multi-material these days. I like the self drilling design for thicker wood. Not cheap, but low effort when installing.
ducks4you
Garden Master
- Joined
- Sep 4, 2009
- Messages
- 11,212
- Reaction score
- 13,969
- Points
- 417
Bolts. Easier to undo.
flowerbug
Garden Master
stainless steel bolts, nuts and washers sprayed with gunk and then duct taped (just kiddin on that last part... sorta... 
)
)
